Arduino: 1.6.2 (Windows 8.1), Board: "Arduino Uno" Sketch uses 4.716 bytes (14%

arduino: 1.6.2 (windows 8.1), board: "arduino uno"

sketch uses 4.716 bytes (14%) of program storage space. maximum 32.256 bytes.

global variables use 200 bytes (9%) of dynamic memory, leaving 1.848 bytes local variables. maximum 2.048 bytes.

avrdude: stk500_recv(): programmer not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer not responding

problem uploading board.  see http://www.arduino.cc/en/guide/troubleshooting#upload suggestions.

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xba

  report have more information with
  "show verbose output during compilation"
  enabled in file > preferences.


i take arduino uno board , have problem!my code ok! can help?please!

see http://www.arduino.cc/en/guide/troubleshooting#upload suggestions.

Arduino Forum > Using Arduino > Installation & Troubleshooting > Arduino: 1.6.2 (Windows 8.1), Board: "Arduino Uno" Sketch uses 4.716 bytes (14%

arduino