i have 1 i/o expansion shield v7.1 dfrobot.
(link)
some vendors compatible yun. on mine, different : 5v pin (of sda/sdl connector of shield) has physical contact ethernet port (and maybe gnd pin too) .
look @ photo have attached
does have experience shield ?
solution after 3 hours : use stacking headers
(link)
some vendors compatible yun. on mine, different : 5v pin (of sda/sdl connector of shield) has physical contact ethernet port (and maybe gnd pin too) .
look @ photo have attached
does have experience shield ?
solution after 3 hours : use stacking headers
Arduino Forum > Products > Arduino Yún (Moderator: fabioc84) > [solved] YUN and I/O Expansion Shield for Arduino V7
arduino
Comments
Post a Comment