i having trouble on trying ethernet shield integrated alarm system project. whenever put ethernet.begin(mac, ip); code, keypad stop responding password input. there wrong it. want build alarm system give capability turn off/on alarm through web browser. can please me on trying ethernet shield work? can download full code project have attached it. code have typed on bottom of post things need add on project.
thanks
code want add on:
for void setup()
{
ethernet.begin(mac, ip);
server.begin();
}
for void loop()
{
// listen incoming clients
ethernetclient client = server.available();
if (client) {
serial.println("new client");
// http request ends blank line
boolean currentlineisblank = true;
while (client.connected()) {
if (client.available()) {
char c = client.read();
serial.write(c);
// if you've gotten end of line (received newline
// character) , line blank, http request has ended,
// can send reply
if (c == '\n' && currentlineisblank) {
// send standard http response header
client.println("http/1.1 200 ok");
client.println("content-type: text/html");
client.println("connection: close"); // connection closed after completion of response
client.println("refresh: 5"); // refresh page automatically every 5 sec
client.println();
client.println("<!doctype html>");
client.println("<html>");
// output value of each analog input pin
(int analogchannel = 0; analogchannel < 6; analogchannel++) {
int sensorreading = analogread(analogchannel);
client.print("analog input ");
client.print(analogchannel);
client.print(" ");
client.print(sensorreading);
client.println("<br />");
}
client.println("</html>");
break;
}
if (c == '\n') {
// you're starting new line
currentlineisblank = true;
}
else if (c != '\r') {
// you've gotten character on current line
currentlineisblank = false;
}
}
}
// give web browser time receive data
delay(1);
// close connection:
client.stop();
serial.println("client disconnected");
}
}
thanks
code want add on:
for void setup()
{
ethernet.begin(mac, ip);
server.begin();
}
for void loop()
{
// listen incoming clients
ethernetclient client = server.available();
if (client) {
serial.println("new client");
// http request ends blank line
boolean currentlineisblank = true;
while (client.connected()) {
if (client.available()) {
char c = client.read();
serial.write(c);
// if you've gotten end of line (received newline
// character) , line blank, http request has ended,
// can send reply
if (c == '\n' && currentlineisblank) {
// send standard http response header
client.println("http/1.1 200 ok");
client.println("content-type: text/html");
client.println("connection: close"); // connection closed after completion of response
client.println("refresh: 5"); // refresh page automatically every 5 sec
client.println();
client.println("<!doctype html>");
client.println("<html>");
// output value of each analog input pin
(int analogchannel = 0; analogchannel < 6; analogchannel++) {
int sensorreading = analogread(analogchannel);
client.print("analog input ");
client.print(analogchannel);
client.print(" ");
client.print(sensorreading);
client.println("<br />");
}
client.println("</html>");
break;
}
if (c == '\n') {
// you're starting new line
currentlineisblank = true;
}
else if (c != '\r') {
// you've gotten character on current line
currentlineisblank = false;
}
}
}
// give web browser time receive data
delay(1);
// close connection:
client.stop();
serial.println("client disconnected");
}
}
have gotten of server examples work? that @ least tell if shield , network both working together.
Arduino Forum > Using Arduino > Programming Questions > Having trouble with Ethernet Shield and my project
arduino
Comments
Post a Comment